Description
micro camera module with two super bright LEDs
muc1032/muC103L2 is based on OVM6946 which is using the most advance CMOS mixed signal technology. It integrates image array, signal processing, timing and control circuitry, all on a single chip. OVM6946 captures high quality 400 x 400 resolution video at 30 frames per second (fps). With two built-in super bright leds, it is well-suited to a wide range of endoscope applications, including medical, veterinarian, and industrial. It is ideal for applications requiring a small footprint, low power and low cost.
Features:
- two super bright LEDs on camera tip
- Small tip size : 2.2mm OD
- Resolution: 400×400 pixels
- Operation voltage 3.3V
- Low power consumption
- Cable size: 0.5mm OD
- Cable length: 1M
Application Example:
- Inspection device
- Endoscope
Specification
| Imager | CMOS imager sensor OVM6946 |
| Optical Format | 1/18” |
| Clock rate | 4MHz |
| Max exposure | 876 x T line |
| Video Output | Analog |
| Scan mode | Progressive |
| Data format | Raw RGB |
| Picture Element | 400x400 pixel |
| Pixel size | 1.75x1.75um |
| Effective image area | 712x707um |
| S/N Ratio | 34.4dB |
| Dynamic range | 67.1dB |
| Operation Voltage | 3.3VDC |
| Power consumption | 25mW |
| Connector | 6pin 2mm pitch |
| Connection | GND, CLK, VOUT, GND, LED, 3.3V |
| Tip Dimension | 2.2OD x 5.0 mm |
| Optical Spec | |
| FOV | 87.5 deg horizontal, 120 deg diagonal |
| F/No | 5.0 |
| Relative Illumination | 60.7% |
| Working Distance | 5mm ~ infinity |
| IR cut off | 665+/-10nm |
C8209DL
The C8209 is a USB module, compatible with muC103L1/muC103L2/mCam703L2 cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.
Features:
- Small board size (47mmx17.5mm)
- USB type C connector (USB2.0)
- LED brightness control circuit
- Sensor auto detection
- UVC device, no driver required.
C9203DL
The C8203DL is a USB module, compatible with muC103L1/muC103L2 cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.
