Description
Backend
Model | Interface | |
---|---|---|
1 | C8282P | USB |
2 | C8203E108 | HDMI |
3 | C8209DP | USB |
muC108/muC108P
muC108/muC108P is a camera module based on OVM6948 which is using the most advance CMOS mixed signal technology. OVM6948 integrates image array, signal processing, timing and control circuitry, all on a single chip. Initially developed for small-outer-diameter medical endoscopes and catheters, muC108/muC108P can be designed into a wide range of applications, including dental, veterinary, internet-of-things (IoT), industrial, wearable and forensic devices. It is ideal for applications requiring a small footprint, low power and low cost. It offers exceptional low-light sensitivity of 1000 mV/lux-sec.
Features:
- Small tip size : 0.64×0.64×1.2mm
- Resolution: 200×200 pixels
- Operation voltage 3.3V
- Low power consumption
- Cable size: 0.5mm OD
- Cable length: 1M
Optical center aligned with mechanical center
Application Example
- Inspection device
- Endoscope
- IoT
Specification
Imager | CMOS imager sensor OVM6948 |
Optical Format | 1/36” |
Clock rate | 4MHz |
Max exposure | 792 x T line |
Video Output | Analog |
Scan mode | Progressive |
Data format | Raw RGB |
Picture Element | 200x200 pixel |
Pixel size | 1.75x1.75um |
Effective image area | 364x364um |
S/N Ratio | 34.4dB |
Dynamic range | 67.1dB |
Operation Voltage | 3.3VDC |
Power consumption | 25mW |
Connector | 6pin 2mm pitch |
Connection | GND, CLK, VOUT, NC, NC, 3.3V |
Tip Dimension | 0.64 x 0.64 mm |
Optical Spec | |
FOV | 120 deg diagonal |
F/No | 2.8 |
Relative Illumination | 56.6% |
Working Distance | 3mm ~ 50mm |
IR cut off | 665+/-10nm |
C8282P
C8282P is an advanced module for interfacing muC108 camera from COMedia. It is USB UVC compatible, good for those people has already had application software. It outputs MJPEG format such that users can manipulate the image data for specific application.
Features:
- UVC compatible, no driver is needed for windows OS
- Built in LED control circuit for illumination control
- Good for some kernel of Linux OS
- Output 384×384/192×192 pixels at 30fps
- MJPEG for video data output
- LED to indicate operation status
- Enter sleep mode when no data streaming
- Simple operation for AWB
- Optional GPIO for PC program
- USB type C connector
- Powered by USB port
C8203E108
This module has been designed for muC108 and output real time video to HDMI monitor. It performs still image capture as well as video recording and store files to SD card. It has been designed for operation by DC5V or lithium battery.
Features:
- Interface to muC108 camera
- Real time Video output
- HDMI output 1280×[email protected]
- Simple operation for AWB
- AVI recording and JPG snap shot
- Store to SD card, up to 32G
- Image quality fine tune possible
- RTC with battery backup
- Battery level detect and display on screen
- 5VDC or 4.2V Li-ion battery operated
- Built in battery charging
- Individual GPIO for key input