Description
Backend
| Model | Output Interface | |
|---|---|---|
| 1 | C8262 | USB |
| 2 | C8203E103 | HDMI |
| 3 | C8261 | CVBS |
| 4 | C8209DP | USB |
| 5 | C8203DP | HDMI |
muC103T
muC103Tis based on OVM6946 which is using the most advance CMOS mixed signal technology. It integrates image array, signal processing, timing and control circuitry, all on a single chip. OVM6946 captures high quality 400 x 400 resolution video at 30 frames per second (fps). It is well-suited to a wide range of endoscope applications, including medical, veterinarian, and industrial. It is ideal for applications requiring a small footprint, low power and low cost. Both muC103T and muC103P have no LEDs on cameras.
Features:
- Small tip size : 1.52mm OD
- Resolution: 400×400 pixels
- Operation voltage 3.3V
- Low power consumption
- Cable size: 0.5mm OD
Application Example
- Inspection device
- Endoscope
Specification
| Imager | CMOS imager sensor OVM6946 |
| Optical Format | 1/18” |
| Clock rate | 4MHz |
| Max exposure | 876 x T line |
| Video Output | Analog |
| Scan mode | Progressive |
| Data format | Raw RGB |
| Picture Element | 400x400 pixel |
| Pixel size | 1.75x1.75um |
| Effective image area | 712x707um |
| S/N Ratio | 34.4dB |
| Dynamic range | 67.1dB |
| Operation Voltage | 3.3VDC |
| Power consumption | 25mW |
| Connector | 6pin 2mm pitch |
| Connection | GND, CLK, VOUT, NC, NC, 3.3V |
| Tip Dimension | 1.52OD x 3.0 mm |
| Optical Spec | |
| FOV | 87.5 deg horizontal, 120 deg diagonal |
| F/No | 5.0 |
| Relative Illumination | 60.7% |
| Working Distance | 4mm ~ infinity |
| IR cut off | 665+/-10nm |
C8262
C8262 is an advanced module for interfacing muC103T camera from COMedia. It is USB UVC compatible, good for those people has already had application software. It outputs MJPEG format such that users can manipulate the image data for specific application.
Features:
- UVC compatible, no driver is needed for windows OS
- Good for some kernel of Linux OS
- Output 384×384 pixels at 30fps
- MJPEG for video data output
- LED to indicate operation status
- Enter sleep mode when no data streaming
- Simple operation for AWB
- Mini USB connector
- Powered by USB port
C8203E103
This module has been designed for muC103T and output real time video to HDMI monitor. It performs still image capture as well as video recording and store files to SD card. It has been designed for operation by DC5V or lithium battery.
Features:
- Interface to muC103T camera
- Real time Video output
- HDMI output 1280×720@30fps
- Simple operation for AWB
- AVI recording and JPG snap shot
- Store to SD card, up to 32G
- Image quality fine tune possible
- RTC with battery backup
- Battery level detect and display on screen
- 5VDC or 4.2V Li-ion battery operated
- Built in battery charging
- Individual GPIO for key input
C8261
This module has been designed to interface the micro camera muC103T, which has analog video signal interface. It provides TV interface to connect TV set.
Features:
- Small size 22x55mm
- Interface to muC103T
- Auto White Balance
- Real time Video output
- Plug and play
- Support NTSC or PAL Display
- Image display in center of monitor
- Latency <0.1sec
- 5VDC operate
