Description
micro camera module with one super bright led
muc1031/muC103L1 is based on OVM6946 which is using the most advance CMOS mixed signal technology. It integrates image array, signal processing, timing and control circuitry, all on a single chip. OVM6946 captures high quality 400 x 400 resolution video at 30 frames per second (fps). With one built-in super bright led, it is well-suited to a wide range of endoscope applications, including medical, veterinarian, and industrial. It is ideal for applications requiring a small footprint, low power and low cost.
Features:
- one super bright led on camera tip
- Small tip size : 2.0mm OD
- Resolution: 400×400 pixels
- Operation voltage 3.3V
- Low power consumption
- Cable size: 0.5mm OD
- Cable length: 1-4M
Application Example
- Inspection device
- Endoscope
Specification
| Imager | CMOS imager sensor OVM6946 |
| Optical Format | 1/18” |
| Clock rate | 4MHz |
| Max exposure | 876 x T line |
| Video Output | Analog |
| Scan mode | Progressive |
| Data format | Raw RGB |
| Picture Element | 400x400 pixel |
| Pixel size | 1.75x1.75um |
| Effective image area | 712x707um |
| S/N Ratio | 34.4dB |
| Dynamic range | 67.1dB |
| Operation Voltage | 3.3VDC |
| Power consumption | 25mW |
| Connector | 6pin 2mm pitch |
| Connection | GND, CLK, VOUT, GND, LED, 3.3V |
| Tip Dimension | 2.0OD x 3.0 mm |
| Optical Spec | |
| FOV | 87.5 deg horizontal, 120 deg diagonal |
| F/No | 5.0 |
| Relative Illumination | 60.7% |
| Working Distance | 4mm ~ infinity |
| IR cut off | 665+/-10nm |
C8209DL
The C8209DL is a USB module, compatible with muC103L1/muC103L2 cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.
Features:
- Small board size (47mmx17.5mm)
- USB type C connector (USB2.0)
- LED brightness control circuit
- Sensor auto detection
- UVC device, no driver required.
C8203DL
The C8203DL is a USB module, compatible with muC103L1/muC103L2 cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.
C8282L(discontinued)
C8282L is an advanced module for interfacing muC1031 camera from COMedia. It is USB UVC compatible, good for those people has already had application software. It outputs MJPEG format such that users can manipulate the image data for specific application.
Features:
- Led brightness control
- UVC compatible, no driver is needed for windows OS
- Good for some kernel of Linux OS
- Output 384×384 pixels at 30fps
- MJPEG for video data output
- LED to indicate operation status
- Simple operation for AWB
- USB type C connector
- Powered by USB port
- Small in size
LED Brightness
| Distance | LED LEVEL | LUX |
|---|---|---|
| 5 mm | High | 3200 |
| 5 mm | Medium | 2500 |
| 5 mm | Low | 900 |
| 10 mm | High | 1400 |
| 10 mm | Medium | 1100 |
| 10 mm | Low | 400 |
