Description
This muC103T2812 camera, featuring a plastic distal end cap, is built around the advanced OVM6946 sensor, which leverages cutting-edge CMOS mixed-signal technology. Specifically, this innovative design integrates the image array, signal processing, timing, and control circuitry into a single chip. As a result, the OVM6946 delivers high-quality video with a resolution of 400 x 400 pixels at 30 frames per second (fps).
Furthermore, with built-in LEDs and a plastic distal end cap, this camera is exceptionally versatile. Consequently, it is well-suited for a wide range of endoscopic applications, including medical, veterinary, and industrial fields. Moreover, its compact size, low power consumption, and cost-efficiency make the OVM6946 camera module an ideal solution for applications where these attributes are critical.
Let us know if you need further customization!
Features:
- Small tip size:2.8mm OD
- One working channel:1.2mm OD
- Built-in two leds
- Resolution: 400×400 pixels
- Operation voltage 3.3V
- Low power consumption
- Cable size: 0.58mm OD
- Cable length: 1-4 Meters
Specification
| Imager | CMOS imager sensor OVM6946 |
| Optical Format | 1/18” |
| Clock rate | 4MHz |
| Max exposure | 876 x T line |
| Video Output | Analog |
| Scan mode | Progressive |
| Data format | Raw RGB |
| Picture Element | 400x400 pixel |
| Pixel size | 1.75x1.75um |
| Effective image area | 712x707um |
| S/N Ratio | 34.4dB |
| Dynamic range | 67.1dB |
| Operation Voltage | 3.3VDC |
| Power consumption | 25mW |
| Tip Dimension | 2.8OD x 3.4 mm |
| Optical Spec | |
| FOV | 87.5 deg horizontal, 120 deg diagonal |
| F/No | 5.0 |
| Relative Illumination | 60.7% |
| Working Distance | 5mm ~ 50mm |
| IR cut off | 665+/-10nm |
C8209DM
The C8209DM is a USB module, compatible with muC and mCam series cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.
Features:
- Small board size (47mmx17.5mm)
- USB type C connector (USB2.0)
- LED brightness control circuit
- Sensor auto detection
- UVC device, no driver required.
- UVC extension unit to control AWB/LED brightness
C8203DM
The C8203DM is a HDMI module, compatible with muC and mCam series cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.
