Description
This muC103T2812 camera, featuring a plastic distal end cap, is built around the advanced OCHFA10 sensor, which leverages cutting-edge CMOS mixed-signal technology. Specifically, this innovative design integrates the image array, signal processing, timing, and control circuitry into a single chip. As a result, the OCHFA10 delivers high-quality video with a resolution of 720 x 720 pixels at 30 frames per second (fps).
Furthermore, with built-in LEDs and a plastic distal end cap, this camera is exceptionally versatile. Consequently, it is well-suited for a wide range of endoscopic applications, including medical, veterinary, and industrial fields. Moreover, its compact size, low power consumption, and cost-efficiency make the OCHFA10 camera module an ideal solution for applications where these attributes are critical.
Let us know if you need further customization!
Features:
- Small tip size:2.8mm OD
- One working channel:1.2mm OD
- Built-in two leds
- Resolution: 720×720 pixels
- Operation voltage 3.3V
- Low power consumption
- Cable size: 0.58mm OD
- Cable length: 1-3 Meters
Specification
| Imager | CMOS imager sensor OVM6946 |
| Optical Format | 1/18” |
| Clock rate | 4MHz |
| Max exposure | 876 x T line |
| Video Output | Analog |
| Scan mode | Progressive |
| Data format | Raw RGB |
| Picture Element | 400x400 pixel |
| Pixel size | 1.75x1.75um |
| Effective image area | 712x707um |
| S/N Ratio | 34.4dB |
| Dynamic range | 67.1dB |
| Operation Voltage | 3.3VDC |
| Power consumption | 25mW |
| Tip Dimension | 2.8OD x 3.4 mm |
| Optical Spec | |
| FOV | 87.5 deg horizontal, 120 deg diagonal |
| F/No | 5.0 |
| Relative Illumination | 60.7% |
| Working Distance | 5mm ~ 50mm |
| IR cut off | 665+/-10nm |
C8209HL
The C8209HL is a USB module, compatible with muC112 series cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.
Features:
- Small board size (47mmx17.5mm)
- USB type C connector (USB2.0)
- LED brightness control circuit
- Sensor auto detection
- UVC device, no driver required.
- UVC extension unit to control AWB/LED brightness
C8203HL
The C8203HL is a HDMI module, compatible with muC112 series cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.
