Description
mCam703/mCam703U
mCam703/mCam703U is based on an ultra-compact and power efficient CameraChip™ image sensor ov9734 designed for slim notebooks, tablets, handsets, and other devices that require a thin bezel. Built on OmniVision’s PureCel® technology, the OV9734 CameraChip™ delivers premium quality images and video, while consuming significantly less power than previous generation image sensors. It integrates image array, signal processing, timing and control circuitry, all on a single chip. It is ideal for applications requiring a small footprint, low power and low cost.
mCam703 uses 10pin connector for C8207 and mCam703U uses micro USB connector for C8203.
Features:
- Tip size 3.8 OD x 8mm
- Resolution: HD1280x720 pixels
- Operation voltage 2.8V, 1.8V,1.2V
- MIPI interface
- Low power consumption
- Cable size: 1.8mm OD
- Cable length: 1M (up to 4M)
Pin Description
1 | EVDD | 1.8V |
2 | VDD | 2.8V |
3 | CLK | clock input |
4 | SCL | I2C clock |
5 | SDA | I2C data |
6 | MDN | MIPI Data Negative o/p |
7 | MDP | MIPI Data Positive o/p |
8 | GND | Ground |
9 | MCN | MIPI clock Negative o/p |
10 | MCP | MIPI clock Positive o/p |
Specification
Imager | CMOS imager sensor OV9734 |
---|---|
Optical Format | 1/9” |
Clock rate | 24MHz |
Max exposure | 798 x T line |
Video Output | MIPI |
Scan mode | Progressive,max 30fps |
Data format | 10bit Raw RGB |
Picture Element | 1280x768 pixel |
Pixel size | 1.4x1.4um |
Effective image area | 1819.58x1033.34um |
S/N Ratio | 36.4dB |
Dynamic range | 68.4dB @16x gain |
Operation Voltage | 2.8V,1.5V |
Power consumption | 69mW |
Connector | 10pin 1.25mm pitch |
Tip Dimension | OD=3.8mm , L=15mm |
Lens specification | FOV: 108deg @full resolution F/N: 4.0 |
Working Distance | 5mm ~ 10mm |
Application Note
Customer can develop his own solution to interface mCam703 but we provide USB modules C8207 for PC application Besides, we provide solution for HDMI output with image control functions
C8207
The C8207 is specially designed for micro-camera module, mCam70x series. It has built in a delicate DSP to interface mCam70x camera as well as the USB2.0 transceiver to output compressed video thru USB. It is UVC compatible and no PC driver is required
Features:
- Small in size, 57x15mm
- USB2.0 UVC device
- Plug and play, no driver required
- MJPEG video at 30fps
- Video size selectable: 1280×720 & 640×480
- Standby mode when no video streaming
- Button for color balance
- Connector to match mCam70x
- Optional LED power output
- Low power consumption
C8203E703
This module has been designed for mCam series and output real time video to HDMI monitor. It performs still image capture as well as video recording and store files to SD card. It has been designed for operation by DC5V or lithium battery.
Features:
- Interface to mCam series camera
- Real time Video output
- HDMI output 1280×720@30fps
- Simple operation for AWB
- AVI recording
- Store to SD card, up to 32G
- Image quality fine tune possible
- RTC with battery backup
- Battery level detect and display onscreen
- 5VDC/4.2V Li-ion battery operated
- Built in battery charging circuit
- Individual GPIO for key input