muC1031/muC103L1&Backends

$225.00$475.00

Description

The price is for samples. If you buy more than 10 pcs, please contact [email protected]

micro camera module with one super bright led

muc1031/muC103L1 is based on OVM6946 which is using the most advance CMOS mixed signal technology. It integrates image array, signal processing, timing and control circuitry, all on a single chip. OVM6946 captures high quality 400 x 400 resolution video at 30 frames per second (fps). With one built-in super bright led, it is well-suited to a wide range of endoscope applications, including medical, veterinarian, and industrial. It is ideal for applications requiring a small footprint, low power and low cost.

Features:

  • one super bright led on camera tip
  • Small tip size : 2.0mm OD
  • Resolution: 400×400 pixels
  • Operation voltage 3.3V
  • Low power consumption
  • Cable size: 0.5mm OD
  • Cable length: 1-4M

 

Application Example

  • Inspection device
  • Endoscope

 

 

Specification

 

Imager CMOS imager sensor OVM6946
Optical Format 1/18”
Clock rate4MHz
Max exposure876 x T line
Video Output Analog
Scan mode Progressive
Data format Raw RGB
Picture Element 400x400 pixel
Pixel size 1.75x1.75um
Effective image area712x707um
S/N Ratio 34.4dB
Dynamic range 67.1dB
Operation Voltage 3.3VDC
Power consumption 25mW
Connector 6pin 2mm pitch
ConnectionGND, CLK, VOUT, GND, LED, 3.3V
Tip Dimension 2.0OD x 3.0 mm
Optical Spec
FOV 87.5 deg horizontal, 120 deg diagonal
F/No5.0
Relative Illumination 60.7%
Working Distance 4mm ~ infinity
IR cut off 665+/-10nm

C8209DL

The C8209DL is a USB module, compatible with muC103L1/muC103L2 cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.

 

Features:

  • Small board size (47mmx17.5mm)
  • USB type C connector (USB2.0)
  • LED brightness control circuit
  • Sensor auto detection
  • UVC device, no driver required.

 

 


 

C8203DL

The C8203DL is a USB module, compatible with muC103L1/muC103L2 cameras, with integrated LED brightness control circuit on board, automatically detects the sensor type and outputs video to the computer, no driver installation is required.

 


C8282L(discontinued)

C8282L is an advanced module for interfacing muC1031 camera from COMedia. It is USB UVC compatible, good for those people has already had application software. It outputs MJPEG format such that users can manipulate the image data for specific application.

Features:

  • Led brightness control
  • UVC compatible, no driver is needed for windows OS
  • Good for some kernel of Linux OS
  • Output 384×384 pixels at 30fps
  • MJPEG for video data output
  • LED to indicate operation status
  • Simple operation for AWB
  • USB type C connector
  • Powered by USB port
  • Small in size

module with USB

 

LED Brightness

DistanceLED LEVELLUX
5 mmHigh3200
5 mmMedium2500
5 mmLow900
10 mmHigh1400
10 mmMedium1100
10 mmLow400

Additional information

Weight 0.2 kg
Dimensions 10 × 5 × 2 cm
Model

muC1031, muC1031+C8282L, muC103L1, muC103L1+C8203DL, muC103L1+C8209DL

Camera cable length

1M, 2M, 3M, 4M

Datasheet


Packing List

muC1031
  • muC1031 camera module 
1pcs
muC1031+C8282L
  • muC1031 camera module
  • C8282L  board 
  • key board 
  • USB type C cable
1pcs
1pcs
1pcs
1pcs
muC103L1
  • muC103L1 camera module 
1pcs
muC103L1+C8209DL
  • muC103L1 camera module
  • C8209DL  board 
  • key board 
  • USB type C cable
1pcs
1pcs
1pcs
1pcs
muC103L1+C8203DL
  • muC103L1 camera module
  • C8203DL  board 
  • key board 
1pcs
1pcs
1pcs